Configuring your printer for a wireless network (For HL-4070CDW)
28
3

Using the Brother automatic installer application on the CD-ROM to configure

your wireless network printer 3
We recommend that you use the Brother automatic installer application on the CD-ROM we have provided
with the printer. For installation, see Wireless configuration for Windows® using the Brother automatic
installer application on page 37 or Wireless configuration for Macintosh® using the Brother automatic installer
application on page 67.
Using the Setup Wizard from the control panel 3
You can configure your print server by using the Setup Wizard function. This is located in the LAN menu on
the printer’s control panel. See the steps below for further information:
aPress any of the Menu buttons (+, -, OK or Back) on the control panel of your printer to take the printer
off-line.
Ready
h
Select ab or OK
Machine Info.
bPress the + or - button to select LAN.
Select ab or OK
LAN
cPress OK to move to the next menu level.
LAN
Wired
dPress the + or - button to select WLAN.
LAN
WLAN
ePress OK to move to the next level.
WLAN
TCP/IP
fPress the + or - button to select Setup WLAN.
WLAN
Setup WLAN
gPress OK to move to select the next level.
Setup WLAN
Setup Wizard
hPress the + or - button to select Setup Wizard, then press OK.
Setup WLAN
Setup Wizard