Wireless configuration for Windows® using the Brother automatic installer application
40
4
lPut the printer in SecureEasySetup™ mode using the control panel.
1Press any of the Menu buttons (+, -, OK or Back) to take the printer off-line.
Ready
h
Select ab or OK
Machine Info.
2Press the + or - button to select LAN.
Select ab or OK
LAN
3Press OK to move to the next menu level.
LAN
Wired
4Press the + or - button to select WLAN.
LAN
WLAN
5Press OK to move to the next menu level.
WLAN
TCP/IP
6Press the + or - button to select Setup WLAN.
WLAN
Setup WLAN
7Press OK to move to the next level.
Setup WLAN
Setup Wizard
8Press the + or - button to select SecureEasySetup.
Setup WLAN
SecureEasySetup
9Press OK.
If the following message appears, press OK again.
WLAN Enable?
On
Note
The message above only appears when the wireless setting is disabled.
10 The wireless network connection status using the SecureEasySetup™ software will be displayed
on the control panel; Connecting WLAN, Connected or Connection NG.
Connecting WLAN is displayed when the print server is trying to make connections to your router
or access point. Wait till either Connected or Connection NG is displayed.