Configuring your printer for a wireless network (For HL-4070CDW)
24
3
fPress OK to move to the next menu level.
WLAN
TCP/IP
gPress the + or - button to select Setup WLAN.
WLAN
Setup WLAN
hPress OK to move to the next level.
Setup WLAN
Setup Wizard
iPress the + or - button to select SecureEasySetup.
Setup WLAN
SecureEasySetup
jPress OK.
If the following message appears, press OK again.
WLAN Enable?
On
Note
The message above only appears when the wireless setting is disabled.
kThe wireless network connection status using the SecureEasySetup™ software will be displayed on the
control panel; Connecting WLAN, Connected or Connection NG.
Connecting WLAN is displayed when the print server is trying to make connections to your router or
access point. Wait till either Connected or Connection NG is displayed.
Connected is displayed when the print server is successfully connected to your router or access point.
You can now use your printer in a wireless network.
Connection NG is displayed when the print server has not successfully connected to your router or
access point. Try starting from a again. If the same message is displayed again, reset the print server
back to the default factory settings and try again.
You have completed the wireless setup. To install the printer driver, Go to step a on this page
for Windows® or page 26 for Macintosh®.

For Windows® users 3

aTurn on your computer. (You must be logged on with Administrator rights.)
Close any applications running before configuration.
bPut the supplied CD-ROM into your CD-ROM drive. The opening screen will appear automatically.
Select your printer and the language.