Brother 4040CN, HL-4050CDN i, j, k, l, m, n

Configuring your printer for a wireless network (For HL-4070CDW)
29
3
iPress OK to enable the wireless LAN interface.
WLAN Enable?
On
Note
After you enable the wireless LAN interface, the wired LAN interface will be set to Off.
jThe printer will search for your network.
It will take a few of seconds to display a list of available SSIDs.
Searching SSID
kSelect the SSIDs from the list using the + or - button. Press OK to select the SSID.
If the displayed SSID you selected is in infrastructure mode, go to step o.
If the displayed SSID you selected is in ad-hoc mode, go to step p.
If you want to add a new SSID, go to step l.
Select SSID&Set
Brother
Note
If your access point is set to not broadcast the SSID, you will have to manually add the SSID name. Go to
step l.
lSelect <New SSID> using the + or - button, and press OK. Go to step m
Select SSID&Set
<New SSID>
mEnter a new SSID using the + or - button. Press OK. Go to step n.
SSID:
_
nUsing the + or - button, select Infrastructure. Press OK. Go to step o.
If you select Ad-hoc, go to step p.
Mode Select
Ad-hoc *
Note
For more information on Ad-hoc and Infrastructure mode, see Wireless network connection
example on page 17.