Wireless configuration for Macintosh® using the Brother automatic installer application
87
5
2Click the Network tab to see the available wireless devices. You can see the Brother wireless print
server in the Network option. Select SETUP.
3Your wireless network is connected successfully.
lChoose the printer you wish to configure, and click Next. If the list is blank, check if the printer is powered
on, and then click Refresh.
Note
The default Node name is “BRWxxxxxx” for the users that connect without a network cable (where
xxxxxx” are the last six digits of Ethernet address).
mThe wizard will search for wireless networks available from your printer. Choose the Ad-hoc network you
wish to associate the printer with, and then click Next.
Note
If the list is blank, check if the printer is within range for wireless communication. Then, click Refresh.