ABOUT THIS PRINTER 1 - 22
5
When putting paper in the MP tray, make sure i t touche s the back of the tray and r emains under the
maximum paper height guides on both sides of the tray.
Figure 1-25
6
While pressing the paper-guide release lever, slide the paper guide to fit the paper size.
Figure 1-26
7
Send the print data to the printer .
8
Close the face-up output tray.
Make sure that the paper is straight and in the proper position in t he MP tray. If it is not, the paper
may not be fed properly, resul ting in a skewed printout or a paper jam.
When you put paper in the MP tray, please remember the following;
During print ing, the inside tray rises to fe ed paper into the printer.
The side to be printed on must be face up.
Put the leading edge (top of the paper) in first and push it gently into the tray.
The top of the paper stack must be under the maximum paper height guides that are on both
sides of the tray.