For Wireless Network Users

h Check Yes if you want to connect with the listed SSID. Click Next and go to k.

i The wizard will search for wireless networks available from your machine. Choose the SSID that you wrote down for your network in step 10-aon page 18, and then click Next.

Note

•If the list is blank, check that the wireless access point/router has power and is broadcasting the SSID, and then see if the machine and the wireless access point/router are within range for wireless communication. Then, click Refresh.

•If your wireless access point/router is set to not broadcast the SSID you can manually add it by clicking the Advanced button. Follow the on-screen instructions for entering the Name (SSID), and then click Next.

j Enter the Network Key you wrote down in step 10-aon page 18, and then click Next.

Note

If your network is not configured for Authentication and Encryption, the ATTENTION! screen will appear. To continue configuration, click OK.

k Confirm the wireless network settings and then click Next. The settings will be sent to your machine.

Note

•The settings will remain unchanged if you click Cancel.

•If you want to manually enter the IP address settings of your machine, click Change IP Address and enter the necessary IP address settings for your network.

•If the wireless setup failure screen appears, click Retry.

l Disconnect the USB cable between the computer and the machine and then click Next.

Wireless setup is now complete. A four level indicator at the right of your machine’s LCD will show the wireless signal strength of your wireless access point/router.

To install the printer driver, continue to step 13-eon page 28.

Now go to

page 28

Wireless

®Windows

Network

Macintosh

 

 

21