For Wireless Network Users

Manual setup from the control panel using the Setup Wizard (Macintosh, mobile devices and Windows®)

11 Setup the wireless settings

Important

You must have the wireless settings you wrote down for your network in step 10-bon page 19 before you proceed.

Note

If you use your machine in an IEEE 802.1x supported wireless network, see Using IEEE 802.1x authentication in the Network User's Guide.

a If you began the wireless setup from step 5 on page 5 (for Macintosh and mobile devices), go to c.

All other users, go to b.

b On your machine, press a or b to choose Network and press OK.

Press a or b to choose WLAN and press OK.

c Press a or b to choose Setup Wizard and press OK.

When WLAN Enable? is displayed, press a to accept. This will start the wireless setup wizard.

Otherwise press Cancel to exit from the wireless setup wizard.

d The machine will search for available SSIDs. It will take several seconds to display a list of available SSIDs.

If a list of SSIDs is displayed, use the a or b key to choose the SSID you wrote down in step 10-bon page 19, then press OK.

e Do one of the following:

If the wireless access point/router of the selected SSID supports WPS and

WPS is available appears, press a and go to f.

If you are using an authentication and

encryption method that requires a Network Key, go to g.

If your authentication method is Open

System and your encryption mode is None, go to h.

Note

•If a list of SSIDs is not displayed, make sure your wireless access point/router is on. Move

your machine closer to the wireless access point/router and try starting from b again.

•If your wireless access point/router is set to not broadcast the SSID you will have to manually add the SSID name. For details, see Configuring your machine when the SSID is not broadcast in the Network User's Guide.

f To connect your machine using the automatic wireless mode, press a to choose Yes. (If you choose No, go to g to enter the Network Key.) When Press WPS on rtr appears, press the WPS button on your wireless access point/router, and then press a twice. Go to h.

g Enter the Network Key you wrote down in step 10-bon page 19.

To enter a character or number, hold down or repeatedly press the a or b key until the character you want appears, and then press OK.

To delete the characters you have entered, press the Back key.

For more information, see Entering Text for Wireless Settings on page 27.

Press OK when you have entered all the characters, then press a for Yes to apply your settings.

h Your machine will now try to connect to your wireless network using the information you have entered.

A connection result message appears on the LCD and a WLAN report will automatically be printed.

If the connection failed, check the error code on the printed report and refer to Troubleshooting on page 25.

22