Wireless Network

Macintosh

 

 

Install the Printer Driver for Macintosh

12 Before you install

a Make sure your machine is connected to the power and your Macintosh is ON. You must be logged on with Administrator rights.

Important

For users of Mac OS X 10.5.7 or lower, upgrade to Mac OS X 10.5.8 - 10.7.x. (For the latest drivers and information for the Mac OS X you are using, visit http://solutions.brother.com/.)

Note

If you want to add the PS driver (BR-Script3 printer driver), please go to the Brother Solutions Center at http://solutions.brother.com/ and visit FAQ's on your model page for instructions.

13 Install the printer driver

a Put the installer CD-ROM into your CD-ROM drive.

b Double-click the Start Here OSX icon. If prompted, select your model.

c Choose Wireless Network Connection and

then click Next.

d Follow the on-screen instructions.

Important

DO NOT cancel any of the screens during the installation. It may take a few minutes for the installation to complete.

Note

If your wireless settings fail, the Wireless Device Setup Wizard screen appears. Follow the on-screen instructions to complete the wireless configuration.

30

e Choose your machine from the list, and then click OK.

Note

•If there is more than one of the same model connected on your network, the MAC Address (Ethernet Address) will be displayed after the model name.

•You can find your machine’s MAC Address (Ethernet Address) and IP Address by printing out the Printer Settings Page. See Print the Printer Settings Page on page 31.

f When this screen appears, click Next.

Note

When the Brother Support screen appears, make your selection and follow the on-screen instructions.

Finish

The installation is now

complete.

Note

If you began the wireless setup from step 5 on page 5, go back to step 6 to continue the machine setting.