USER’S GUIDE
Printing
Question
The printer prints unexpectedly or it prints garbage.
The printer cannot print full pages of a document. An error message “ PRINT OVERRUN” occurs.
The printer prints the first couple of pages correctly, then some pages have text missing. (For
Recommendation
Turn the printer off and on again to reset the printer.
Make sure your application software is correctly set up to use this printer by checking the printer settings in your application software.
(For
Check the printer emulation settings. If you can use the supplied RPC program, use it to change the settings as required. Also, you can print the current setting list from the RPC program or Printer Control Panel.
(For
Make sure that the correct interface type and settings are made to match your computer. Be sure to use the
The printer received a very complex print job and could not process part of the page. This may be solved by the following ways.
If you are using Windows 95/98 or Windows 3.1 with the supplied printer driver, see the “Setting up the Printer for Windows” section.
Try to reduce the complexity of your document or reduce the print resolution.
This is a problem usually relating to serial interface settings. Your computer is not recognizing the printer’s input buffer full signal. Causes could be incorrect serial cable (incorrectly wired or too long) or incorrect setting of your computer serial interface.