CHAPTER 3 CONTROL PANEL
CHAPTER 3
CONTROL PANEL
LAMPS AND SWITCH
This section refers to the following lamps and switch on the printer control panel.
Drum
Alarm
Ready
Paper
Data
Toner
Fig.
✒Note
When the power switch is off or the printer is in sleep mode, all lamps including the Ready lamp are off.
Ready (Paper) Lamp
The Ready lamp indicates the current status of the printer.
Lamp | Printer status | |
Off | The power switch is off or the printer is in sleep | |
mode. If the printer is in sleep mode, it will wake | ||
❍ | ||
up automatically when it receives data or you | ||
| ||
| press the control panel switch. | |
Blinking | The printer is warming up. | |
❍↔● | (Blinking at 1 second intervals) | |
| ||
|
| |
Blinking | The printer is cooling down and stops printing | |
❍↔● | until the printers internal temperature lowers. | |
(Blinking at 2 seconds intervals) | ||
| ||
On | The printer is ready to print. | |
● |
| |
|
|
This lamp also works as the Paper lamp with the Alarm lamp. They blink simultaneously to indicate a paper error. See “Operator Calls” Chapter 6.