USER’S GUIDE

Test Print Mode

The printer has the following test print mode. Follow these steps:

1.Make sure that the top cover is closed.

2.Hold down the switch and turn on the power switch. Keep the switch depressed until the Drum lamp comes on.

The Drum lamp lights to indicate that the printer is in the test print mode.

3.Press the switch again to execute the test print or hold down the switch to select another option and release the switch to execute the selected option.

The test print mode varies depending upon the printer model as follows:

Lamp Lit

Choice

Function

Drum

Test sample page

The printer prints a test sample page.

 

 

The printer returns to the ready status after

 

 

printing.

Alarm

Print Config & Print

The printer prints the current configuration of

 

Fonts I

the printer and a list of the internal fonts.

 

 

The printer returns to the ready status after

 

 

printing. (HL-1040/1050 only)

Ready

Factory Reset

The printer is restored to the factory setting and

 

 

permanent fonts and macros are cleared.

 

 

The printer returns to the ready status after

 

 

printing. (HL-1040/1050 only)

Data

Hex Dump Print

The printer can print data as hexadecimal values,

 

 

so that you can check data errors and problems.

 

 

To exit from this mode, you have to turn off the

 

 

printer. (HL-1040/1050 only)

3-4