28
5
Entering Fax mode 5
Press (Fax) to enter Fax mode.
While the machine is faxing, the LCD will
show the new job number and the memory
available.The number of pages you can scan
into the memory will vary depending on the
data that is printed on them.
Faxing from the ADF 5
aMake sure you are in Fax mode .
bPlace the document face up in the ADF.
(See Using the ADF on page 17.)
cEnter the fax number using the dial pad,
One Touch, Speed Dial or Search.
dPress Black Start or Color Start.
The machine starts scanning the
document.
Note
• To cancel, press Stop/Exit.
• If you send a black & white fax when the
memory is full it will be sent in real time.
Faxing from the scanner
glass 5
You can use the scanner glass to fax pages
of a book one at a time. The document can be
up to Letter or A4 size.
You cannot send color faxes with multiple
pages.
Note
Since you can only scan one page at a
time, it is easier to use the ADF if you are
sending a multiple page document.
aMake sure you are in Fax mode .
bLoad your document on the scanner
glass.
cEnter the fax number using the dial pad,
One Touch, Speed Dial or Search.
dPress Black Start or Color Start.
If you press Black Start, the
machine starts scanning the first
page. Go to step e.
If you press Color Start, the
machine starts sending the
document.
eDo one of the following:
To send a single page, press 2 to
choose No (or press Black Start
again).
The machine starts sending the
document.
To send more than one page,
press 1 to choose Yes and go to
step f.
fPlace the next page on the scanner
glass.
Press OK.
The machine starts scanning the page.
(Repeat step e and stepf for each
additional page.)
Sending a Fax 5