Brother MFC-240C a b, a b, a, b c, d e

90
Transferring your faxes or Fax
Journal report B
If the LCD shows:
Change Unable XX, Clean Unable XX,
Init. Unable XX, Print Unable XX or
Scan Unable XX
we recommend transferring your faxes to
another fax machine. (See Transferring faxes
to another fax machine on page 90.)
You can also transfer the Fax Journal report
to see if there are any faxes you need to
transfer. (See Transferring Fax Journal report
to another fax machine on page 90.)
Note
If there is an error message on the
machine's LCD, after the faxes have been
transferred, disconnect the machine from
the power source for several minutes, and
then reconnect it.
Transferring faxes to another fax
machine B
If you have not set up your Station ID, you
cannot enter fax transfer mode.
aPress Menu, 9, 0, 1.
bDo one of the following:
If the LCD shows No Data, there are
no faxes left in the machine's
memory.
Press Stop/Exit.
If the LCD shows Enter Fax No.,
enter the fax number to which faxes
will be forwarded.
cPress Black Start.
Transferring Fax Journal report to
another fax machine B
If you have not set up your Station ID, you
cannot enter fax transfer mode.
aPress Menu 9, 0, 2.
bEnter the fax number to which Fax
Journal report will be forwarded.
cPress Black Start.
Document jam B
Documents can jam if they are not inserted or
fed properly, or if they are too long. Follow the
steps below to clear a document jam.
Document is jammed in the top of the
ADF unit B
aTake out any paper from the ADF that is
not jammed.
bOpen the ADF cover.
cPull the jammed document up and to the
left.
dClose the ADF cover.
ePress Stop/Exit.
Note
To avoid future document jams close the
ADF cover properly by pushing it gently in
the middle.