
Check Receiving Status
Press 9 7
then forFax messages, press 1.
Voice messages, press 2.
1 long beep — Received message
3 short beeps — No messages
Change Receive Mode
Press 9 8
then forTAD, press 1.
Fax/Tel, press 2.
Fax Only, press 3.
Exit Remote Retrieval
Press 9 0.
Using Remote Access Code
Dial your fax number from a telephone or
fax machine using touch tone.
When your machine answers,
immediately enter your Remote
Access Code (3 digits followed by ).
Your fax machine signals the kinds of
messages it received:
1 long beep — Fax messages
2 long beeps — Voice messages
3 long beeps — Voice and Fax messages
No beeps — No messages
After 2 short beeps, enter a command.
Press 9 0 to reset the fax machine when
you finish.
Hang up.
TAD (Telephone Answering Device)
REMOTE RETRIEVAL ACCESS CARD
1
2
3
4
6
5
5 1