11 Network Scanning

If you want to scan from the machine on a network, you must choose the networked machine in the Device Selector application located in Macintosh HD/Library/Printers/Brother/Utilities/DeviceSelector or from the Model pop-up menu in the main screen of ControlCenter2. If you already installed the MFL-Pro Suite Software following the network installation steps in the Quick Setup Guide then this selection should already be made.

To use the machine as a network scanner, the machine must be configured with a TCP/IP address. You can set or change the address settings from the control panel. (See Control Panel Setup in the Network User’s Guide.)

Note

For network scanning, a maximum 25 of clients can be connected to one machine on a network. For example, if 30 clients try to connect at a time, 5 clients will not be shown on the LCD.

Before using Network Scanning

Configuring network scanning

a From Library, choose Printers, Brother, Utilities and DeviceSelector, and then double-click Device Selector.

The Device Selector window appears. This window can also be opened from ControlCenter2. For more information, see Using ControlCenter2 on page 180.

b Specify your machine by IP address or mDNS service Name. To change the IP address, enter the new

11

IP address. You can also choose a machine from the list of the available machines. Click Browse to

show the list.

c Click OK.

201