Network Scanning

Configuring the Scan to Network Default Settings

a Choose Network in FTP/Network Scan Settings from FTP/Network Scan Settings tab. Click Submit. b Choose the Profile you want to configure in the FTP/Network Scan Profile tab.

c Enter the name that you want to use for the Scan to Network profile. This name will be displayed on the

 

LCD of the machine and can be up to 15 characters.

11

 

d The Host Address is the domain name of the CIFS server. Enter the Host Address (for example ftp.example.com) (up to 64 characters) or the IP address (for example 192.23.56.189).

e Enter the destination folder where your document will be stored on the CIFS server (for example /brother/abc/) (up to 60 characters).

f Choose the file name you want to use for the scanned document. You can choose from seven preset and two user defined File Names. The file name that will be used for your document will be the file name you selected plus the last 6 digits of the flatbed/ADF scanner counter plus the file extension (For example, Estimate098765.pdf). You can also manually enter a File Name up to 15 characters.

g Choose the quality that the document will be scanned at from the pull-down list. You can choose Color 100, Color 200, Color 300, Color 600, Gray 100, Gray 200, Gray 300, B&W 200 or B&W 200x100.

214