ControlCenter2

SCAN

There are four scan buttons for the Scan to Image, Scan to OCR, Scan to E-mail and Scan to File features.

Image (Default: Apple Preview)

Lets you scan a page directly into any graphic viewer/editor application. You can choose the destination application, such as Adobe® Photoshop® or any kind of image editing application on your computer.

OCR (Default: Apple TextEdit)

Lets you scan a page or document, automatically run the OCR application and put text (not a graphic image) into a word processing application. You can choose the target word processing application, such as Microsoft® Word or any word processing application on your computer. You must download Presto! PageManager and install it on your computer. For installation information see Using Presto! PageManager on page 157.

E-mail(Default: your default E-mail software)

Lets you scan a page or document directly into an E-mail application as a standard attachment. You can choose the file type and resolution for the attachment.

File

Lets you scan directly to a disk file. You can change the file type and destination folder, as needed.

ControlCenter2 gives you the ability to configure the hardware Scan button on your machine and the

 

ControlCenter2 software button for each scan feature. To configure the hardware Scan button on your

 

machine choose the Device Button tab in the configuration menu for each of the SCAN buttons. To configure

10

the software button in ControlCenter2 choose the Software Button tab in the configuration menu for each of

the SCAN buttons.

NOTE

You can change the Scan button settings using your Brother machine - however, these changes are only temporary.

If you want to make permanent changes, choose the Device Button tab in the configuration menu for each of the SCAN buttons and configure as required.

162