i (For MFC-J4710DW)
If you want to use 2-sided scanning, press 2-sided Scan.
Press 2-sided Scan: Long Edge or 2-sided Scan: Short Edge.
j Press Set with Touch Panel. Press On.
Press Options.
h
NOTE
If you want to save the computer as a shortcut, press Save as Shortcut.
d
c
b
a
Swipe up or down, or press a or b to display the computer you want to send to.
Press OK.
e f
g Press the computer name.
If the LCD prompts you to enter a PIN number, enter the 4-digit PIN number for the computer on the LCD. Press OK.
Do one of the following:
The icon moves to the middle and is highlighted in blue.
Swipe left or right to display
Press
Load your document.
Scan to Image
When you choose Scan to Image, your document will be scanned and sent directly to the computer you designated on your network. The ControlCenter software will launch the default graphics application on the designated computer.
For MFC-J4510DW/J4710DW
Press
(to Image).
(Scan).
(to Image).
d

Network Scanning

c Press s or t to display Factory Reset. Press Factory Reset.

Press Yes.

e Press .

If you want to use the default settings, go to m.

13

If you want to change the default settings, go to h.

211