i (For MFC-J4710DW)
If you want to use 2-sided scanning, press 2-sided Scan.
Press 2-sided Scan: Long Edge or 2-sided Scan: Short Edge.
Press Options.
h
If you want to use the default settings, go to m.
If you want to change the default settings, go to h.
NOTE
If you want to save the computer as a shortcut, press Save as Shortcut.
Swipe up or down, or press a or b to display the computer you want to send to.
Press OK.
The icon moves to the middle and is highlighted in blue.
Press
(to OCR).
d
(to OCR).
c
Swipe left or right to display
(Scan).
b
Press
Load your document.
a
e f
g Press the computer name.
If the LCD prompts you to enter a PIN number, enter the 4-digit PIN number for the computer on the LCD. Press OK.
Do one of the following:
Network Scanning
NOTE
You can change the Scan button settings using your Brother machine - however, these changes are only
temporary. If you want to make permanent changes, use the ControlCenter software. (For Windows®, see Configuring the Scan button settings on page 75 when choosing Home Mode, and see Configuring Scan button settings on page 90 when choosing Advanced Mode. For Macintosh, see Configuring Scan button settings on page 170.)
Scan to OCR
When you choose Scan to OCR, your document will be scanned and sent directly to the computer you designated on your network. The ControlCenter software will launch the Nuance™ PaperPort™ 12SE software or Presto! PageManager and convert your document into text that can be viewed and edited from a word processing application on the designated computer.
For MFC-J4510DW/J4710DW

13

213