USBWindows®

18 Connect the USB cable

a Lift the scanner cover until it locks securely into the open position.

b Connect the USB cable to the USB port

marked with a symbol. You will find the USB port inside the machine, as shown in the callout below.

c Carefully guide the USB cable into the cable channel and out the back of the machine. Connect the cable to your computer.

IMPORTANT

Make sure that the cable does not restrict the cover from closing, or an error may occur.

d Lift the scanner cover to release the lock a. Gently push the scanner cover support down b and close the scanner cover c using both hands.

1

3

2

CAUTION

Be careful not to pinch your fingers when the scanner cover closes.

e

The installation will continue automatically.

 

 

 

 

The installation screens appear one after

 

 

 

 

another.

 

 

 

NOTE

 

 

 

 

 

 

 

 

 

 

DO NOT cancel any of the screens during the

 

 

 

 

 

 

 

installation. It may take a few seconds for all

 

 

 

 

screens to appear.

 

 

Windows

 

 

 

 

 

 

f

If the Environmental Advice for Imaging

 

 

 

g

Equipment screen appears, click Next.

 

 

When the On-Line Registration screen

USB

®

 

 

appears, follow the on-screen instructions.

 

 

 

 

h

Click Next.

Macintosh

If you do not want to set your machine as the

 

 

 

 

default printer, clear the Set as Default Printer

 

 

i

check box, and then click Next.

 

 

When the Setup is Complete window

 

 

 

 

appears, confirm the settings, and then click

 

 

 

 

 

 

 

 

Next.

 

 

15