For Wireless Network Users
Macintosh and mobile devices)
a Confirm your wireless access point/router has the WPS or AOSS™ symbol as shown below.
b Place the Brother machine within range of your WPS or AOSS™ access point/router. The range may differ depending on your environment. Refer to the instructions provided with your access point/router.
If you began the configuration from step 7 on page 9, go to d.
All other users go to c.
c On your machine, press Menu.
Press a or b to choose Network. Press OK. Press a or b to choose WLAN. Press OK.
d Press a or b to choose WPS/AOSS and press OK.
When Enable WLAN? is displayed, press OK to accept.
This will start the wireless setup wizard.
NOTE
If your wireless access point/router supports WPS and you want to configure your machine using the PIN (Personal Identification Number) Method, see Configure Your Wireless Network Using the PIN Method of
e When the LCD instructs you to start WPS or AOSS™, press the WPS or AOSS™ button on your wireless access point/router (for more information, see the instructions provided with your wireless access point/router), and then press OK on your machine.
NOTE
For mobile device users:
•Connect your mobile device to a wireless access point/router using a
•Download and install Brother iPrint&Scan (Android™/iOS/Windows® Phone) from your mobile device’s application download site. You can also use AirPrint (iOS) with this machine.
•To download the User’s Guide for the application you are using (Brother iPrint&Scan/AirPrint), visit the Brother Solutions Center at http://solutions.brother.com/ and click Manuals on your model’s page.
•If you began the setup from step 7 on page 9, go back to step 8 to continue the machine settings.
To install
For Windows® users:
Now go to
Page 28
For Macintosh users:
Now go to
Page 31
This feature will automatically detect which mode (WPS or AOSS™) your wireless access point/router uses to configure your machine.
Wireless setup is now complete.
Network Wireless
25