USBMacintosh

For Macintosh USB interface users (Mac OS X v10.6.8, 10.7.x, 10.8.x)

16 Before you install

Make sure your machine is connected to the power and your Macintosh is ON. You must be logged on with Administrator rights.

NOTE

For Mac OS X v10.6.0 to 10.6.7 users, upgrade to Mac OS X v10.6.8 - 10.8.x.

17 Connect the USB cable

NOTE

•DO NOT connect the machine to a USB port on a keyboard or a non-powered USB hub.

•Connect the machine directly to your Macintosh.

a Lift the scanner cover until it locks securely into the open position.

b Connect the USB cable to the USB port

marked with a symbol. You will find the USB port inside the machine, as shown in the callout below.

c Carefully guide the USB cable into the cable channel and out the back of the machine. Connect the cable to your Macintosh.

IMPORTANT

Make sure that the cable does not restrict the cover from closing, or an error may occur.

 

Windows

USB

®

 

Macintosh

 

 

17