For Wireless Network Users

18 Manual setup from the control panel using the Setup Wizard (Windows®,

Macintosh and mobile devices)

You must have the wireless settings you wrote down for your network in step 17-bon page 21 before you proceed.

a If you began the wireless setup from step 7 on page 9, press a or b to choose Setup Wizard and press OK. Then go to c.

All other users go to b.

b On your machine, press Menu.

Press a or b to choose Network. Press OK. Press a or b to choose WLAN. Press OK. Press a or b to choose Setup Wizard. Press OK.

c When Enable WLAN? is displayed, press OK to accept.

This will start the wireless setup wizard. To cancel, press Stop/Exit.

d The machine will search for available SSIDs. It will take several seconds to display a list of available SSIDs.

If a list of SSIDs is displayed, press a or b to choose the SSID you wrote down in step 17-bon page 21. Press OK.

If the wireless access point/router of the selected SSID supports WPS, and the machine asks to use WPS, go to e.

If the machine asks you to enter a Network Key, go to f.

Otherwise, go to g.

NOTE

•If the list is blank, check that the wireless access point/router has power and is broadcasting the SSID. Move your machine

closer to the wireless access point/router and try starting from a again.

•If your access point is set to not broadcast the SSID, you will have to manually add the SSID name. For more information, see Configure Your Wireless Network When the SSID Is Not Broadcast in the Software and Network User’s Guide.

24

e Press 1 (Yes) to connect your machine using WPS. (If you choose 2 (No) to continue manual configuration, go to f to enter a Network Key.)

When the LCD shows Start WPS, press the WPS button on your wireless access point/router, and then press 1 (Next) to proceed. Go to g.

f Enter the Network Key you wrote down in step 17-bon page 21 using the dial pad to choose each letter or number.

NOTE

The letters appear in this order: lower case, upper case and then numbers. To move the cursor left or right, press d or c.

(For more information, see Entering Text for Wireless Settings on page 34.)

Press OK when you have entered all the characters, then press 1 (Yes) to apply your settings.

g Your machine will now try to connect to your wireless network. It may take a few minutes.

Wireless setup is now complete.

NOTE

For mobile device users:

•Connect your mobile device to a wireless access point/router using a Wi-Fi connection.

•Download and install Brother iPrint&Scan (Android™/iOS/Windows® Phone) from your mobile device’s application download site. You can also use AirPrint (iOS) with this machine.

•To download the User’s Guide for the application you are using (Brother iPrint&Scan/AirPrint), visit the Brother Solutions Center at http://solutions.brother.com/ and click Manuals on your model’s page.

•If you began the setup from step 7 on page 9, go back to step 8 to continue the machine settings.

To install MFL-Pro Suite, continue to step 19.

For Windows® users:

Now go to

Page 28

For Macintosh users:

Now go to

Page 31