Brother NV1250D Stopping while embroidering

176
EMBROIDERY — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Stopping while embroidering
If the embroidery is stopped before it is complete,
check the current needle count before turning off the
sewing machine.
Memo
zWhen the sewing machine is turned off, the
embroidery size and layout return to the
original setting.
aPress (Start/stop button) to stop the
sewing machine.
bCheck the current needle count on the screen
and make a note of it.
If the needle count is not displayed, press
(Settings key), and then use to display
the following screen.
Press (Back key) to return to the
embroidery screen.
cPress (Embroidery key).
XThe confirmation message is displayed.
dPress .
XThe selected pattern is deleted, and the
screen for selecting the embroidery pattern
type is displayed.
eTurn off the sewing machine.
• Always detach the embroidery unit when you
move the sewing machine.
fTurn on the sewing machine and select the
pattern.
gPress .