GETTING READY — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
30
fPass the thread through the slot as shown, and
then pull the thread out toward the front.
aCutter
XThe cutter cuts the thread.
Note
zMake sure that the thread is correctly
inserted through the tension-adjusting spring
of the bobbin case. If it is not inserted
correctly, reinsert the thread.
aTension-adjusting spring
gReattach the bobbin cover.
Insert the tab in the lower-left corner of the
bobbin cover, and then lightly press down on
the right side.
XThe bobbin threading is finished.
Next, thread the upper thread. Continue with
the procedure in “Upper Threading” (page 31).
Memo
zYou can begin sewing without pulling up the
bobbin thread. If you wish to pull up the
bobbin thread before starting to sew, pull up
the thread according to the procedure in
“Pulling up the bobbin thread” (page 38).
1
1
1
2