Brother PC-420PRW manual Sewing Cylindrical or Large Pieces, Stitching cylindrical pieces

GETTING READY ———————————————————————————————————————————————————

Sewing Cylindrical or Large Pieces

When sewing cylindrical or large pieces of fabric, remove the flat bed attachment.

CONTENTS

Stitching cylindrical pieces

Removing the flat bed attachment makes it easier to sew cylindrical pieces such as cuffs and pant legs.

1Pull the flat bed attachment off to the left.

XWith the flat bed attachment removed, free- arm sewing is possible.

2Slide the part that you wish to sew onto the arm, and then sew from the top.

3When you are finished with free-arm sewing, install the flat bed attachment back in its original position.

Sewing large pieces of fabric

The optional wide table makes sewing large pieces of fabric easier.

1Opentable. up the legs at the bottom of the wide Pull out the four legs until they snap into place.

2Pull the flat bed attachment off to the left.

XWith the flat bed attachment removed, free- arm sewing is possible.

3Install the wide table.

Keeping the wide table level, fully slide it into place.

GETTING READY SEWING BASICS UTILITY STITCHES APPENDIX

Note

●The optional wide table is available through your brother retailer.

INDEX

42