Brother PC-420PRW manual Machine is now set for programmed thread-cutting

Press	to select		.
6To return to		, press	.

XThe machine is now set for programmed thread-cutting.

7Press (OK key).

XThe initial stitch screen appears again, and

appears in the lower-left corner of the screen.

•When the sewing machine is turned off, the programmed thread-cutting setting is cancelled.

8Position the fabric under the presser foot, and

then press (start/stop button) once.

1

1Start/stop button

XAfter reverse/reinforcement stitches are sewn, the machine starts sewing.

9After reaching the end of the stitching, press (reverse/reinforcement stitch button) once.

This step is not necessary if a stitch such as those for sewing buttonholes and bar tacks is selected where reinforcement stitches are automatically sewn.

XAfter reverse/reinforcement stitches are sewn, the sewing machine stops and cuts the thread.

The thread is cut here.

Memo

●Reverse/reinforcement stitches will not be sewn and the thread will not automatically be cut if the start/stop button is pressed at the end of the stitching. Be sure to press the reverse/reinforcement stitch button at the end of the stitching.

CONTENTS GETTING READY SEWING BASICS UTILITY STITCHES APPENDIX

INDEX

Useful Functions 59