Brother PC-420PRW manual Changing the Machine Settings, List of stitch or machine attribute

■List of stitch or machine attribute

The stitch or machine attribute that can be set are listed below. For details on each attribute, refer to the corresponding reference page.

				CONTENTS
Attribute	Icon	Details	Reference
Automatic
reverse/		Specifies automatic reverse/reinforcement stitching.	page 57
reinforcement
stitching
Automatic
thread-		Specifies automatic thread-cutting.	page 58	GETTING
cutting
Check		Allows combined patterns to be checked.	page 116
pattern
				READY
Left/right
mirror		Mirror images patterns along a vertical axis.	page 119
imaging
Pattern		Adjusts the length of satin stitches.	page 118
length				SEWING
Repeated/		Specifies whether the pattern will be sewn once or	page 117
Pattern size		Sets the size of patterns to be large or small.
single sewing		repeatedly.	page 115	BASICS
density
Stitching		Specifies the sewing density of the stitching.	page 118
Save settings		Allows adjusted pattern widths and lengths to be	page 60	UTILITY
		sewing machine is stopped.
position			page 16
		saved.
Needle		Specifies where the needle is positioned when the
				STITCHES
Twin needle		Specifies the twin needle.	page 28
sewing
Stitch width		Allows the stitch width to be adjusted with the	page 99
control		sewing speed controller.
Language		Allows the language used in the screens to be	page 17
		changed.		APPENDIX
LCD		Specifies whether or not a beep is sounded with
Buzzer		each operation.	page 143
brightness		Adjusts the brightness of the LCD.	page 16
Vertical
pattern		Adjusts the up and down position of the pattern.	page 121
adjustment
				INDEX

Changing the Machine Settings 15