Brother PE-DESIGN, Brother USB Writer manual Tutorial, b Memo, Adjust the text size and position

Tutorial

b Memo:

• If you want to edit the entered text, click

on the Tool Box, click the text to

select it, and then select the menu command Text - Edit Letters. Edit the text in the Edit Text Letters dialog box that appeared. (For more details, refer to “Editing entered text” on page 36.)

•If you want to delete the text, select it, and then press the Delete key.

•If you want to change the text color, font or other attributes after entering the text,

click on the Tool Box, click the text to select it, and then change the settings on the Sewing Attributes bar. (For more details, refer to “Applying Sewing Attributes to Text and Regions” on page 39.)

3Adjust the text size and position.

Click on the Tool Box.

→The shape of the pointer changes to

.

Handles

The status bar shows the dimensions (width and height) of the text.

Click the text , and then drag a handle to adjust the selected text to the desired size.

b Memo:

•The shape of the pointer changes to ,

, , or , depending on the handle

that the pointer is over.

• is for scaling the width.

• is for scaling the height.

• and are for scaling both

dimensions at the same time. (The height-to-width proportion is maintained.)

•If the key is held down while a handle is dragged, the text is enlarged or reduced in both width and height from the center of the text. (The height-to-width proportion is maintained.)

•If the handles have disappeared, click the text to show them again.

Move the pointer over the selected text. The

pointer changes to . Drag the text to the desired position.

12