Brother PE-DESIGN manual Writing multiple embroidery files to an original card, b Memo, a Note

Arranging Embroidery Designs

2.Click or File, then Write to Card, then Current Design.

→The following message appears.

a Note:

•If the original card is not brand new, make sure that the designs already stored on the card are no longer needed.

•If no original card is inserted, the following message appears

•Insert an original card, and then click Retry.

•To quit the operation, click Cancel.

•If a .pes file is saved with objects extending off the Design Page or with the number of stitches or number of colors for the objects exceeding the Design Page limitations, the design cannot be saved on an original card.

3.Click OK.

→The message “Now transmitting” appears while the current embroidery design is transferred to the original card, and then the following message appears.

b Memo:

To quit the operation, click Cancel.

4.Click OK to close the message.

b Memo:

“Overwriting” on page 49 and “Saving with a new name” on page 49.

■Writing multiple embroidery files to an original card

You can save multiple .pes files to an original card at the same time.

1.Insert an original card into the USB card writer module.

a Note:

•The original card is inserted correctly when you hear it snap into place.

•It is not necessary to turn off the computer when original cards are inserted or removed from the USB card writer module.

2.Click File, then Write to Card, then Other PES files.

→The following dialog box appears with the contents of the last folder accessed displayed in the available patterns list.

Available patterns Selected patterns

b Memo:

Patterns that are either too large or have too many stitches for the embroidery hoop size selected with the Hoop size selector, are displayed with a red crossed-out hoop

( ).

50