Brother PE 400D Embroidering, Before YOU Begin, Embroidery unit and memory cards optional

EMBROIDERING

BEFORE YOU BEGIN

1. Embroidery unit and memory cards (optional).

J

CAUTION

–Do not touch the embroidery unit connectors. Doing so could cause damage to the machine.

–Do not move the sewing machine while the embroidery unit is attached.

The embroidery unit could fall and cause injury. 1

–Do not carry embroidery unit by the carriage or apply excessive force to it, or you could cause damage.

– Keep hands and other items away from the embroidery unit carriage and embroidery hoop while they are in motion. Injury could result.

1Hoop holder

2	Carriage
3	Connector	2

3

–Always store memory cards in the accessory case.

–Always turn machine off before removing the embroidery unit or memory cards.

–Please note that the small embroidery hoop (optional) will not work with certain pattern sizes and sewing positions.

–Please note that memory cards will not work with certain pattern sizes, and some memory cards are not compatible with this machine.

2.Attaching the embroidery foot “Q”

CAUTION

–Always make sure the power is off before changing feet.

Injury could result if the “START/STOP” button is accidentally pushed and the machine starts running during this operation.

–Do not use the embroidery foot “Q” for anything other than embroidery.

1. Raise needle with the up-needle button. Turn power off.

2. Loosen the screw on the foot holder and remove foot holder.

3. Attach the embroidery foot. Screw back on tightly.

1 Screw

* Make sure the needle clamp screw is also tightened.

1

62