![](/images/new-backgrounds/1063670/63670159x1.webp)
Fitting the embroidery frame to the embroidery unit
CAUTION
Be sure to wait until the embroidery unit has finished initializing before fitting the embroidery frame. (Refer to page 65.)
5 |
3 |
1 |
2 |
1.Raise the presser foot to its highest position. Then pass the embroidery frame under the presser foot with the mounting bracket on the left side and the fabric right side up.
1 | 2 |
2.Align the two pins on the embroidery unit frame holder with the mounting bracket on the frame, and then press the frame into the embroidery unit frame holder until a click is heard.
CAUTION
Always make sure to attach the hoop by both pins.
If the hoop is not firmly attached, it could mess up your stitching.
1Embroidery arm frame holder
2 Pins
Removing the embroidery frame
1.While holding the frame with both hands, pull the front of the hoop up to lift it out of the front pin.
2.Then pull the back of the hoop up to lift it out of the back pin.
5 |
3 |
1 |
2 |
3.Raise the presser foot lever, then pull frame out from under foot.
77