Brother PE 400D operation manual Instruction messages, Alarms

Models: PE 400D

1 112
Download 112 pages 53.88 Kb
Page 108
Image 108

This message will appear if you press the “START/ STOP” button while the foot controller is attached.

This message is dis- played if a non-buttonhole pattern is selected and the “START/STOP” button or “REVERSE STITCH” button is pressed while the buttonhole lever is lowered.

This message is dis- played if a buttonhole pat- tern is selected and the “START/STOP” button or “REVERSE STITCH” but- ton is pressed while the buttonhole lever is raised.

This message will appear

if you press “ ” key to restore a pattern that has not been saved to memory.

This message will appear during embroidery mode if you have combined a group of characters to- gether that extend beyond the boundary of the em- broidery hoop.

This message is dis- played when “START/ STOP” button or “RE- VERSE STITCH” button are pressed, while no pat- tern has been selected.

This message is dis- played if the frame pattern for embroidering has not been completely input, and when the “START/ STOP” button is pressed when in editing mode.

Instruction messages

This message is dis- played while a pattern is being saved into memory.

This message is dis- played during bobbin winding.

This message is dis- played while the embroi- dery unit is initializing.

Alarms

Proper operation: One beep

Incorrect operation: Two or four beeps

105

Page 108
Image 108
Brother PE 400D operation manual Instruction messages, Alarms