Toshiba 57X3000A owner manual Selecting the AV output mode, Connecting a computer

Connecting your TV

Selecting the AV output mode

You can select the AV output from three modes; ATV, DTV or Monitor.

1From AV Connection menu, press ￿or ￿to select AV Output.

AV connection

PC/HDMI1 audio	HDMI1
HDMI1 audio	Digital
AV output	ATV
MENU Back EXIT Watch TV

2Press ￿ or ￿ to select the desired output mode.

ATV: Selected programmed channel from Analog TV system is output from the AV OUTPUT terminal.

DTV: Selected programmed channel from Digital TV system is output from the AV OUTPUT terminal.

Monitor: The AV output depends on the selected video input mode.

(e.g. If o1 is selected (- page 25), the AV signal input to o1 is output from the AV OUTPUT terminal.

Note:

When it is set to Monitor (and in DTV mode) or DTV, and the digital program is locked, the output will be blank and audio will be muted.

Connecting a computer

To connect a PC to the RGB/PC terminal on the TV:

An analog RGB (15 pin) computer cable can be connected.

TV back view

Mini D-sub 15 pin TV back view

PC/HDMI1

(AUDIO)

Computer

RGB PC cable

Conversion adapter (if necessary)

Audio cable for PC-to-TV connection

Connect a PC cable from the computer to the o RGB/PC terminal on the back of the TV.

The following signals can be displayed:

•VGA: VESA 640 5 480 @ 60/75 Hz

•SVGA: VESA 800 5 600 @ 60/75 Hz

•XGA: VESA 1024 5 768 @ 60/70/75 Hz

•W-XGA: VESA 1280 5 768 @ 60/75 Hz

•W-XGA: VESA 1360 5 768 @ 60 Hz

•S-XGA: VESA 1280 5 1024 @ 60/75 Hz

However, these signal formats are converted to match the number of pixels of the LCD panel.

Therefore, the TV may not display small text properly.

Notes:

•Some PC models cannot be connected to this TV.

•There is no need to use an adapter for computers with DOS/ V compatible mini D-sub 15 pin terminal.

•A bar may appear in the upper, lower, right or left side of the screen, or parts of the picture may be obscured depending on some signals. This is not the malfunction.

•If the edges of the picture are stretched, readjust the picture position adjustments in the PC Setting menu.

•Depending on the specification of the PC you are playing the DVD-Video on, and the DVD’s title, some scenes may be skipped, or you may not be able to pause during multi-angle scenes.

•If connecting a certain PC model that signal is particular, the PC signal may not be detected correctly.

Signal names for mini D-sub 15 pin connector

Pin assignment for RGB/PC terminal

	5	1
	10	6
	15	11
Pin No.	Signal name	Pin No.	Signal name
1	R	9	NC
2	G	10	Ground
3	B	11	NC
4	NC (not	12	NC
	connected)
5	NC	13	H-sync
6	Ground	14	V-sync
7	Ground	15	NC
8	Ground

37