21
Using the TV’s features (General)
5Press , then press or to select Hue, Saturation or
Brightness.
6Press or to adjust the settings as required.
Notes:
•If you select color management Off mode, this mode is not
available.
•In the PC input mode (- page 25), this mode is not
available.
Resetting the base color adjustment
The Reset function adjusts the base color adjustment to the
factory settings.
1From the Base color adjustment menu, press or
to select Reset.
2Press Q.
Using the active backlight control
In order to improve screen visibility, the active backlight
control sets the screen brightness automatically during dark
scenes.
1From the PICTURE menu, press or to select
Active Backlight Control.
2Press or to select On or Off.
Using the cinema mode - analog only -
A movie film’s picture runs at 24 frames a second, whereas
movie software such as DVD, etc., that you enjoy watching on
television at home runs at 30 (NTSC) or 25 (PAL) frames a
second. To convert this signal to reproduce a smooth motion
and picture quality, select the On mode.

Effective signal and setup conditions:

• When the Video input mode is selected.
• When the input signal format is 480i and 576i signals.
1Press M, then press or to display the PICTURE
menu.
2Press or to select Cinema mode, then press or
to select On or Off.
Note:
When a DVD movie with subtitle is playing back, this mode
may not work correctly.
Using the auto format
When the TV receives a true HDMI signal picture and the auto
format is On, it will automatically be displayed in HDMI
signal format, irrespective of the TV’s previous setting.
When in Digital TV, the display format will follow the
broadcasted format.
1Press M, then press or to display the FUNCTION
menu.
2Press or to select Auto format, then press or
to select On or Off.
Activating the ANT ATT (Antenna Attenuation)
If the signal being received by the TV is too strong, this may
result in picture interference and/or buzzing sound. Setting
ANT ATT to On reduces signal strength, and can help to
remove the interference.
1From SET UP menu, press or to select ANT ATT.
2Press or to select On or Off.
Red
Brightness
0
Hue
0
Saturation
0
PICTURE
MENU
Back Watch TV
EXIT
OK
Picture settings
Off
Base color adjustment
3D Color management
Active Backlight Control
On
Cinema mode On
FUNCTION
MENU
Back Watch TV
EXIT
Teletext Auto
Auto format
Blue screen
Side panel
On
On
1
ANT ATT
Manual tuning OK
AV connection OK
Picture position OK
Auto tuning OK
Language
SET UP
MENU
Back Watch TV
EXIT
English
Off