4 Insert edge (A) of the cleaning sheet into the printing unit and guide it out to just in front of the cutter.

Do not remove part (A) of the cleaning sheet.

The printed side of the cleaning sheet should be facing upwards.

5 After inserting the cleaning sheet into the printing unit, push down the roll release lever and remove the part B of the cleaning sheet.

6 Close the DK Roll cover and turn ON the power to the printer.

7 Press the Feed button ( ) for more than one second.

The roller rotates for 100 mm.

The adhesive face of the cleaning sheet removes any stains or dust on the roller.

If you do not press the Feed button for more than

one second, the roller rotates for only 8 mm.

 

Dispose of the cleaning sheet after use.

Feed button

Label outlet maintenance

When glue is attached to the label

 

outlet (metallic plate part and resin

Label outlet

guide part) and the printer damages

 

the label, pull out the power plug from

 

the outlet and clean the label outlet

 

with a cloth dipped into ethanol or

 

isopropyl alcohol.

 

It is recommended to clean the label

 

outlet when replacing the cutter unit.