4Introduction

Warning

Follow these guidelines to avoid fire, electric shock, or other damage.

„Power Cord

Use only the authorized power source (220 - 240 V AC) for the printer.

Use only the power cord included with the printer.

Do not overload the power outlet socket with too many appliances or insert the power cord into a damaged outlet socket.

Do not cut, damage, alter or place heavy objects on the power cord.

Do not use the power cord if it is damaged.

Do not handle the power cord or plug if your hands are wet.

Ensure the power plug is correctly inserted into the power outlet.

If the printer will not be used for an extended period, remove the power supply cord from the electrical outlet.

„Battery

Only use the correct type of battery for the printer.

Do not attempt to disassemble, alter, apply heat or expose to a direct flame, direct sunlight or extremely high temperatures and humidity.

Immediately flush with water any area of the body that comes into contact with the inner contents of the battery. Seek medical assistance should the contents come into contact with the eyes or mouth.

Insert the battery ensuring the correct polarity is observed.

Do not allow the battery to get wet.

Remove the battery from the printer immediately at the end of its life.

Do not solder the battery directly.

Use of incorrect batteries for this printer may cause leakage or explosion, which could result in fire, injury or damage to the surroundings of the machine.

Dispose of used batteries according to the instructions.

Do not short-circuit the battery terminals with metallic objects.

The supplied battery is not rechargeable. Do not attempt to recharge it.

Keep the battery away from children. Seek medical assistance immediately if the battery is swallowed.

Avoid dropping or subjecting the battery to severe impacts that can damage it.

Avoid subjecting the battery to ultrasound vibration. This could cause an internal short-circuit to occur.

Caution

Follow these guidelines to avoid fire, electric shock, or other damage.

„The Printer

The standard electrical outlet should be close to the printer and be easily accessible.

„Power Cord

Always hold the power plug when removing the power cord from or inserting it into the outlet. Pulling on the power cord cable could cause problems with the power cord.