UTILITY STITCHES ———————————————————————————————————————————————————————————————————————————————————————————————————

■Using the optional quilting guide

Use the quilting guide to sew parallel stitches that are equally spaced.

aInsert the stem of the quilter into the hole at the rear of the walking foot or presser foot holder.

†Walking foot

†Presser foot holder

bAdjust the stem of the quilter so that the quilt guide aligns with the seam that has already been sewn.

Free-motion quilting

With free-motion quilting, the feed dogs can be lowered (using the feed dog position lever) so that the fabric can be moved freely in any direction. The optional quilting foot is needed for free-motion quilting.

aRemoveholder. the presser foot and the presser foot

•For details, refer to “Removing the presser foot holder” (page 34).

bAlign the quilting foot with the lower-left side of the presser bar.

The pin on the quilting foot should be positioned over the needle clamp screw.

aPin on quilting foot

bPresser foot holder screw

cNeedle clamp screw

cHold the quilting foot in place with your right hand, and then tighten the presser foot holder screw using the disc-shaped screwdriver in your left hand.

aPresser foot holder screw

CAUTION

●Be sure to securely tighten the screws with the disc-shaped screwdriver, otherwise the needle may touch the presser foot, causing it to bend or break.

64