TV OPERATION
Press the POWER button to turn on the TV; the POWER indicator will light green.
OPTIONS
AIR: If using a
VHF/UHF
antenna.
CABLE: If using Cable
TV.
Set the AIR/CABLE option as described on page 18.
2 
1
Adjust the volume level by pressing the VOLUME UP ❶ or DOWN ❷ button. The volume level will be indicated on the screen by a green numerical display between 0 and 100 where 0 is the lowest setting and 100 is the loudest.
NOTES:
• When TV/CATV is set to TV, only channels up to 69 can be selected. When set to CATV, channels up to 125 can be selected.
• If an invalid channel is selected, the display will revert to the original channel.
3 
1 2 
For proper operation, before selecting channels, they must be set into the TV’s program memory, see page 19. Press and release the CHANNEL UP ❶ or DOWN ❷ button. The TV automatically stops at the next channel set into memory. This will not operate if channels are not set into memory.
Direct Program Selection buttons (0 - 9, 100+)
Use these buttons to select a channel. The channel number will appear at the top right corner of the screen.
• For Channels 01 through 99, press the two digits in order.
• For Channels 100 through 125, press the 100 button ❸, then the remaining two digits.
FAQs:
Why do I only receive 69 channels, when my cable goes much higher? AIR/CABLE option must be set to CABLE when using cable, see page 18.
Why are some channels scrambled?
You must subscribe to these channels through your cable company.
23
