Memorex MT3010OM manual Tv Operation Continued, Display, Video Mode, Audio Mode, Channel Lock

DISPLAY	TV OPERATION (CONTINUED)
	VIDEO MODE

Press the DISPLAY button once to show the time. Press again to show the mode (i.e. S-VIDEO). Press a third time to clear the screen or wait three seconds and the screen will clear automatically.

AUDIO MODE

Press to select a mode (PRESET, SOFT or USER) as set on page 29.

NOTE: You cannot change the audio MODE while using the Y Pb Pr or computer inputs..

CHANNEL LOCK

Channel Lock provides instant access to one of your favorite channels at the touch of a button. To set, go to the channel you want to set as the channel lock, then press and hold the CHANNEL LOCK button on the remote until the on-screen display shows “LOCKED”; the channel is now locked in. To access, simply press the CHANNEL LOCK button on the remote and the TV will automatically tune to that channel.

Press to select a mode(PRESET, SOFT or USER) as set on page 28.

NOTE: You cannot change the video MODE while using the Y Pb Pr or computer inputs.

VIDEO MUTE

Press and the picture will disappear from the screen, but the sound will still be heard.

SRS

This feature allows theTV’s left and right speakers to provide a surround sound effect.

Press to cycle through the surround modes as follows: SURROUND 1: Simulated stereo

SURROUND 2: Stereo surround

SURROUND 3: Mono surround

SURROUND OFF: To turn off surround sound.

25