KNOWING YOUR SEWING MACHINE
dFully lower the needle threader lever.
XThe end of the needle threader rotates toward you and the hook passes through the eye of the needle.
eCatch the thread on the hook as shown below.
aHook
bThread
fWhile lightly holding the thread, release the needle threader lever. The hook will pull the thread through the needle.
gPull the loop of the thread passed through the
eye of the needle toward the rear of the machine.
aLoop of thread
CAUTION
●Be careful not to pull on the thread with force or it may bend the needle.
●If the thread does not pass through the eye of the needle, start from step c again.
hRaise the presser foot lever.
a Presser foot lever
iPass the end of the thread through the presser foot, and then pull out about 5 cm (2 inches) of thread toward the rear of the machine.
a5 cm (2 inches)
Note
●If you incorrectly feed the thread you may cause sewing problems.
26