Brother XL-2620, XL-3510, XC6771-021 operation manual Optional Accessories, Using the Walking Foot

XL2600.book Page 41 Thursday, November 4, 2004 9:46 PM

OPTIONAL ACCESSORIES

Using the Walking Foot

		Stitch	Stitch
Stitch Name	Pattern	Length	Width
		[mm (inch)]	[mm (inch)]
Straight Stitch		1-4	2-3
		(1/16-3/16)	(1/16-1/8)
Zigzag Stitch		1-4	0-5
		(1/16-3/16)	(0-3/16)

This foot is very useful for sewing materials such as vinyl cloth, synthetic leather, thin leather, etc. These materials are difficult to feed when sewing. The walking foot prevents these materials from crumpling, slipping or sticking between the presser foot and the material.

Note

●Only use the walking foot with straight or zigzag stitches. Do not use other patterns. Reverse stitches can not be sewn with the walking foot.

1Removeoutlet. the power supply plug from the

2Raise the needle and the presser foot.

3Loosen the presser foot screw to remove the presser foot holder.

2

13

1Screwdriver

2Presser foot holder

3 Presser foot screw

4Attach the forked section of the connecting lever to the needle clamp, and fit the walking foot to the presser bar.

1

2

3

1 Forked part of operation lever	5
2 Presser bar holder

3 Needle clamp

5Lower the presser foot lever and then tighten the presser foot screw.

1

1Presser foot screw

41