XL2600.book Page 36 Thursday, November 4, 2004 9:46 PM
SEWING BUTTONHOLES AND BUTTONS
Sewing Buttons
Stitch |
| Stitch | Stitch |
|
| |
Pattern | Length | Width | Foot | Other | ||
Name | ||||||
|
| [mm (inch)] | [mm (inch)] |
|
| |
Zigzag |
| F | Any | Button | Darning | |
Stitch |
| (1/64) | Sewing | Plate | ||
|
| Foot | ||||
|
|
|
|
| ||
|
|
|
|
|
|
1Measure the distance between the buttonholes and set the pattern selection dial to the Zigzag Stitch, and set the width you want.
2Removeoutlet. the power supply plug from the
3Change the foot to the button sewing foot.
4Place the darning plate on the needle plate.
5Connectoutlet. the power supply plug into the wall
6Put a button between the foot and the fabric and make sure that the needle enters the holes without hitting the button. If it hits, see step
1.
7At a slow speed, sew about 10 stitches.
8Remove the material from the machine. Cut the upper and lower threads and tie both threads at the back of the material.
CAUTION
●Make sure the needle does not hit the button during sewing. The needle may break and you may be injured.
36
