3534
1Left row
2STITCH LENGTH
3Shorter
4Longer
5In case
3. After obtaining a satisfactory feeding on the left
side, stitch the right side of the buttonhole and
observe the feeding.
4. If the right side is too coarse or fine compared to
the left side, adjust the buttonhole fine adjustment
screw as described below.
If the right side is too coarse, turn the screw with
the enclosed large screwdriver in the – direction.
If the right side is too fine, turn the screw with the
enclosed large screwdriver in the + direction.
This adjustment allows both sides of the buttonhole
to appear uniform.
6Stitch length dial
7Buttonhole fine adjusting screw
8Right row
9In case
1
2
34
F
7
6
8
–+9
–+
BUTTONHOLE AND BUTTON SEWING
OJALES Y COSTURA DE BOTONES
F
5
F
5
1
Lado izquierdo2
Largo de puntada3
Más corto4
Más largo5
En caso que3. Cuando se logró una alimentación correcta para
la parte izquierda, cosa la parte derecha del ojal
y mire de nuevo la alimentación del tejido.
4. Si la parte derecha del ojal es demasiada gruesa
o fina con relación a la parte izquierda, apriete o
suelte el tornillo para ajuste fino del ojal tal como
se describe a continuación.
Si la parte derecha es demasiada gruesa, con el
destornillador grande incluido, gire el tornillo en
el sentido del –. Si la parte derecha es demasiada
fina, gire dicho tornillo en el sentido del +.
Este ajuste permite que ambos lados del ojal parezcan
uniformes.
6
Dial de longitud de puntada7
Tornillo de ajuste fino de ojal8
Lado derecho9
En caso que9