Bryant 551B installation instructions Operating, Weight

MAXIMUM ALLOWABLE DIFFERENCE

(in.)

A-B	B-C	A-C
0.5	1.0	1.0

Fig. 3 — Unit Leveling Tolerances

NOTE: Trap should be deep enough to offset maximum unit static differ- ence. A 4-in. trap is recommended.

Fig. 5 — Condensate Drain Piping Details

HORIZONTAL	DRAIN PLUG
DRAIN OUTLET

NOTE: Drain plug is shown in factory-installed position.

Fig. 4 — Condensate Drain Location

NOTES:

1.Place unit on curb as close as possible to the duct end.

2.Dimension in ( ) is in millimeters.

3.Hook rigging shackles through holes in base rail, as shown in detail “A.” Holes in base rails are centered around the unit center of gravity. Use wooden top skid when rigging to prevent rigging straps from damaging unit.

4.Unit weights do not include economizer. See Table 1 for econo- mizer weights.

5.Weights include base unit without the Perfect Humidity™ dehumid- ification system. See Table 1 for additional unit operating weights with the Perfect Humidity dehumidification system.

CAUTION: All panels must be in place when rigging.

	OPERATING			A			B			C
551B	WEIGHT
	lb	kg	in.		mm	in.		mm	in.		mm
090	755	343	77.42		1967	41.5		1054	42.12		1070
102	895	406	77.42		1967	41.5		1054	50.12		1273
120	915	415	77.42		1967	41.5		1054	50.12		1273
150	930	422	77.42		1967	41.5		1054	50.12		1273

Fig. 6 — Rigging Details

—4—