Bryant 677C--A Remove and Store in Job Files, Preliminary Information Model no, Temperatures

677C-- -- A

START-UP CHECKLIST

(Remove and Store in Job Files)

I. PRELIMINARY INFORMATION MODEL NO.:

SERIAL NO.:

DATE:

TECHNICIAN:

II. PRESTART-UP (Insert check mark in box as each item is completed)

( ) VERIFY THAT ALL PACKING MATERIALS HAVE BEEN REMOVED FROM UNIT

( ) REMOVE ALL SHIPPING HOLD DOWN BOLTS AND BRACKETS PER INSTALLATION INSTRUCTIONS

( ) CHECK ALL ELECTRICAL CONNECTIONS AND TERMINALS FOR TIGHTNESS

( ) CHECK GAS PIPING FOR LEAKS (WHERE APPLICABLE)

( ) CHECK THAT INDOOR (EVAPORATOR) AIR FILTER IS CLEAN AND IN PLACE

( ) VERIFY THAT UNIT INSTALLATION IS LEVEL

( ) CHECK FAN WHEEL, AND PROPELLER FOR LOCATION IN HOUSING/ORIFICE AND SETSCREW TIGHTNESS

III.START-UP ELECTRICAL SUPPLY VOLTAGE COMPRESSOR AMPS

INDOOR (EVAPORATOR) FAN AMPS

TEMPERATURES

OUTDOOR (CONDENSER) AIR TEMPERATURE							DB
RETURN-AIR TEMPERATURE						DB			WB
COOLING SUPPLY AIR		DB						WB
HEAT PUMP SUPPLY AIR__________________
GAS HEAT SUPPLY AIR
PRESSURES
GAS INLET PRESSURE	IN. W.C.
GAS MANIFOLD PRESSURE				IN. W.C.
REFRIGERANT SUCTION			PSIG, SUCTION LINE TEMP*
REFRIGERANT DISCHARGE					PSIG, LIQUID TEMP{

( ) VERIFY REFRIGERANT CHARGE USING CHARGING CHARTS GAS HEAT TEMPERATURE RISE

TEMPERATURE RISE (See Literature) RANGE MEASURED TEMPERATURE RISE

* Measured at suction inlet to compressor

{Measured at liquid line leaving condenser.

E2009 Bryant Heating & Cooling Systems D 7310 W. Morris St. D Indianapolis, IN 46231	Edition Date: 04/09	Catalog No. II677C---05
Manufacturer reserves the right to discontinue, or change at any time, specifications or designs without notice and without incurring obligations.		Replaces: II677C--- 04

36