GAPA

APPLICATION CONSIDERATIONS

The Perfect Airt Purifier is designed for use in the return air duct of a forced air heating, cooling, and ventilation system. Models GAPAAXBB1625 and GAPAAXBB2025 are specifically designed for use in systems with a forced air gas furnace.

Air Conditioning

The Perfect Airt Purifier should be installed in a system so that all the return air is circulated through the air purifier. It should be located upstream of both the furnace and the air conditioning evaporator coil. This will help keep the furnace and evaporator coil clean and prevent condensation from forming within the Perfect Airt Purifier.

Humidifiers

An evaporative humidifier can be mounted upstream of the Perfect Airt Purifier. It is best to install atomizing humidifiers downstream of the air purifier because hard water salt deposits and water droplets may damage air purifier. If an atomizing humidifier must be mounted upstream of the Perfect Air t Purifier, it should be mounted as far upstream as possible (at least 6 ft recommended), and a standard disposable furnace filter should be mounted between the humidifier and the air purifier to trap hard water salt deposits and water droplets.

Transitions

If the return air duct or furnace openings do not fit the Perfect Air t Purifier cabinet openings, gradual transitions are recommended to reduce air turbulence and maximize efficiency. No more than 20 degrees (about 4 in. per running ft) of expansion should be used on each side of the transition fitting.

Turning Vanes

If the Perfect Airt Purifier is installed adjacent to a 90 degree duct elbow, turning vanes should be added inside duct to improve air distribution across the face of the air purifier.

Electrical Power

The Perfect Airt Purifier should only be powered when airflow is present. The furnace control EAC terminals provide power only when the furnace blower is operating. Perfect Air t Purifier models GAPAAXBB1625 and GAPAAXBB2025 are designed to be powered from the electronic air cleaner (EAC) terminals on a furnace electronic control. If EAC terminals are not available, an alternative airflow sensing mechanism must be used to ensure the Perfect Airt Purifier is only powered when airflow is present. Contact local Bryant distributor for information on approved alternatives.

Door (x1)

Cabinet (x1)

Air Purification Cartridge (x1)

Enhancement Module (x1)

Safety Screen (x1)

Furnace Adapters (x2)

(x1)

 

(x2)

(x1)

 

Duct Gasket Tape

(x2)

 

 

 

(1 roll)

(x2)

 

 

Installation Manual

 

Installation Components

 

(in bag attached to power cord)

 

 

 

 

Return Duct Adapters:

 

 

Long (x2) / Short (x2)

A06064

Fig. 2 - Perfect Airt Purifier Components

2

Page 2
Image 2
Bryant AIRT PURIFIER operating instructions Application Considerations

AIRT PURIFIER specifications

The Bryant Air Purifier is designed to elevate indoor air quality, making it an essential addition to modern homes. This advanced air purification system integrates industry-leading features and technologies, providing effective solutions for a healthier living environment.

One of the standout features of the Bryant Air Purifier is its multi-stage filtration system. This system captures a wide range of airborne particles, including dust, pollen, pet dander, and smoke, ensuring cleaner air. The high-efficiency particulate air (HEPA) filter is a critical component, adept at trapping particles as small as 0.3 microns with an efficiency of 99.97%. This level of filtration is crucial for allergy sufferers and anyone looking to improve overall health.

Beyond the HEPA filter, the Bryant Air Purifier includes an activated carbon filter designed to eliminate odors and harmful volatile organic compounds (VOCs) commonly found in household products. This feature not only enhances air quality but also addresses unpleasant smells, creating a fresher indoor atmosphere.

The air purifier utilizes innovative UV-C light technology, which works to neutralize viruses, bacteria, and mold spores that may be present in the air. This additional layer of protection ensures that the air circulating within your home is not only free from particulates but also sanitized, contributing to a more hygienic space.

Connectivity and convenience are also significant aspects of the Bryant Air Purifier. With smart technology integration, users can monitor air quality levels and control settings remotely via a smartphone app. Customizable settings allow for optimal performance based on individual air quality needs, and real-time air quality monitoring helps users maintain a healthy environment.

The design of the Bryant Air Purifier is another point of appeal; it combines functionality with a sleek aesthetic, allowing it to blend seamlessly into various home decors.

Easy maintenance is a hallmark of this purifier, featuring accessible filter changes and a user-friendly interface. Overall, the Bryant Air Purifier is an exceptional choice for individuals and families seeking to enhance their indoor air quality with advanced technology, helping to cultivate a healthier living environment.