Step 1Turn the heating and cooling system off.

!WARNING

ELECTRICAL SHOCK HAZARD

Failure to follow this warning could result in personal injury or death.

Before installing or servicing system, always turn off main power to system. There may be more than one (1) disconnect switch.

Step 2Turn the Perfect Airt Purifier switch to the off position.

Step 3Remove the Perfect Airt Purifier door.

Step 4Slide out the old air purifier cartridge and discard. Step 5Install the new air purifier cartridge.

NOTE: Make sure that the arrows on the air purifier cartridge point toward the furnace. This should be in the same direction as airflow.

Step 6Replace the Perfect Airt Purifier door.

Step 7Turn the Perfect Airt Purifier switch to the on position.

Step 8Turn on the heating and cooling system.

Door Switch Magnet

A06066

Fig. 9 - Door Switch Magnet

TROUBLESHOOTING

!CAUTION

SAFETY HAZARD

Failure to follow this caution may result in personal injury or equipment damage.

The following instructions are for use by qualified personnel only.

!WARNING

ELECTRICAL SHOCK HAZARD

Failure to follow this warning could result in personal injury or death.

The following procedures will expose electrical components. Disconnect power between checks and then proceed carefully.

The Perfect Airt Purifier is equipped with a power indicator light located on the door (see Fig. 8). This power indicator light will illuminate when the Perfect Airt Purifier door is installed, the power switch is in the on position, AND the furnace blower is running. If the power indicator light is not illuminated, follow the troubleshooting steps below.

Step 1Check that the Perfect Airt Purifier door is installed.

NOTE: A magnet in the door (see Fig. 9) is used to activate a safety switch in the power supply when the door is installed. The power supply will not energize the air purifier unless the safety switch is activated.

Step 2Check that the Perfect Airt Purifier power switch is in the on (closed) position.

Step 3Confirm that the furnace blower is operating.

NOTE: Power will not be supplied to the Perfect Airt Purifier from the furnace controls EAC terminals unless the blower is running.

Step 4Confirm that power provided from the furnace control EAC terminals is being conducted through the wiring to the Perfect Airt Purifier power supply.

Step 5If all of the above steps are completed and the power indicator light is still not illuminating, replace the power supply on the enhancement module. Note that there are no serviceable parts within the power supply.

GAPA

7

Page 7
Image 7
Bryant AIRT PURIFIER operating instructions Troubleshooting, Safety Hazard

AIRT PURIFIER specifications

The Bryant Air Purifier is designed to elevate indoor air quality, making it an essential addition to modern homes. This advanced air purification system integrates industry-leading features and technologies, providing effective solutions for a healthier living environment.

One of the standout features of the Bryant Air Purifier is its multi-stage filtration system. This system captures a wide range of airborne particles, including dust, pollen, pet dander, and smoke, ensuring cleaner air. The high-efficiency particulate air (HEPA) filter is a critical component, adept at trapping particles as small as 0.3 microns with an efficiency of 99.97%. This level of filtration is crucial for allergy sufferers and anyone looking to improve overall health.

Beyond the HEPA filter, the Bryant Air Purifier includes an activated carbon filter designed to eliminate odors and harmful volatile organic compounds (VOCs) commonly found in household products. This feature not only enhances air quality but also addresses unpleasant smells, creating a fresher indoor atmosphere.

The air purifier utilizes innovative UV-C light technology, which works to neutralize viruses, bacteria, and mold spores that may be present in the air. This additional layer of protection ensures that the air circulating within your home is not only free from particulates but also sanitized, contributing to a more hygienic space.

Connectivity and convenience are also significant aspects of the Bryant Air Purifier. With smart technology integration, users can monitor air quality levels and control settings remotely via a smartphone app. Customizable settings allow for optimal performance based on individual air quality needs, and real-time air quality monitoring helps users maintain a healthy environment.

The design of the Bryant Air Purifier is another point of appeal; it combines functionality with a sleek aesthetic, allowing it to blend seamlessly into various home decors.

Easy maintenance is a hallmark of this purifier, featuring accessible filter changes and a user-friendly interface. Overall, the Bryant Air Purifier is an exceptional choice for individuals and families seeking to enhance their indoor air quality with advanced technology, helping to cultivate a healthier living environment.