14
H —Reversing valve output (O/W2/B) is energizedwhen HEAT mode is selected.
C —Reversing valve output (O/W2/B) is energizedwhen COOL mode is selected.
Default is C.
Option 11 --Minimum Deadba nd Between Heating A nd Cooling
Selections:
01 through06 — Default is 02.
Sets the minimum allowable numb er of degrees between h eating and cooling
setpoints. One setpoint will “push ” the other to maintain this difference.
Option12 --Smart Recovery (programmable modelonly)
Selections:
OF,30, 60, 90 — Default is 90.
Smart Recovery OF means setpointschange immediately at a program schedule
change. Thirty, 60, or 90 selects the number of minutes recovery starts before
programmed recovery time. Recovery takes place smoothlyduring the selected
recovery time,ending at the recovery time and temperature which is programmed.
Ifthe setpoint is changed during smart recovery,the smart recovery is cancelledand
the new setpoint is effectiveimmediately. Not available with non--programmable
thermostats.